About us MSDS News Warranty Contact us
Flowzan

Description

FLOWZAN is a polymeric viscosifying agent for fresh water, seawater and sodium chloride and potassium chloride brines.

Application

FLOWZAN can use any water – base mud system to replace or supplement bentonite. Additions of FLOWZAN yield shear thinning fluids. Viscosity is low at bit shear rates to optimize penetration, and is high at low annular shear rates to provide maximum hole cleaning.

Recommended treatment

FLOWZAN should be mixed thought the mud hopper at 25 to 30 minutes per sack to prevent “ balling” and “ fish eyes”. A bactericide is needed to prevent biodegradation in freshwater and seawater fluids. Concentration of 1,43 to 2,85 kg/m3 (0,5 to 1,0 lb/bbl) are normal added to provide adequate viscisty.

Typical physical properties

Appearance…………………white to yellow powder

Specific gravity……………..Not establised

Solubility…………………….complete

Bulk density…………………880 kg/m3(55lb/ft3)

Safe handling recommendations

Utilize normal precaution for employee protection when handling chemical products.

Use of appropriate respirator gloves, goggles and apron is recommended for employee comfort and protection.

Shipping

FLOWZAN does not have a restricted classification for transportation by the international or domestic regulatory agencies.

Packing

FLOWZAN is packaged in 50 lb or 25 kg multi – wall bags


 
 
 
Privacy Statement  |  Term of Use  |  Site Map  |  Location Map
Visitor: 849108 Copyright © 2009 by Thuan Phong. Thiết kế web bởi Trang Web Vàng.