About us MSDS News Warranty Contact us
Corrosion Inhibitor ACI-1
DESCRIPTION 
ACI-1 inhibits corrosion in 28% HCL acid to 120oC and 15% HCL acid, 5% HF acid, 3% CH3COOH to 150oC.

ACI-1 is compatible intensifiers such as formic acid(ACI-2).

ACI-1 is used for treatment at the bottom in high pressure and high temperature of oil wells and other industries.
 
APPLICATION

ACI-1 inhibits corrosion in acid additives. Always thoroughly mix the acid additives in the acid prior to leaving the service center and again before pumping downhole.

Although ACI-1 is compatible with most surfactants, demulsifiers and mutual solvents, care should be taken when desiging acid treatments. Laboratory tests are highly recommended to determine the upper temperature limits of any acid system.
 
TYPICAL PHYSICAL PROPERTIES

Appearance                                                Dark red liquid

Specific gravity@ 25oC                                 1.01 – 1.05

Density@ 25oC                                           8.41 – 8.75 lbs/gal

Solubility in water                                       Partial

Compatibility                                             Cationic and nonionic

Flash point, TCC                                        > 72oC

PH                                                           2.0 – 4.0

Freeze point                                              < -30oC

SAFE HANDLING RECOMMENDATIONS

Utility normal precautions for employee protection when handling chemical products. Use of appropriate respirator, gloves, goggles and apron is recommended for employee confort and protection.

SHIPPING

ACI-1 has to be noted as corrosive classification for transportation by the international or domestic regulatory agencies.

PACKING

In 208 liters per drum.
 
MATERIAL SAFETY DATA SHEET

Trade Name: ACI-1
Download here
 
 
 
Privacy Statement  |  Term of Use  |  Site Map  |  Location Map
Visitor: 354219 Copyright © 2009 by Thuan Phong. Thiết kế web bởi Trang Web Vàng.