About us MSDS News Warranty Contact us
CMC-EHV / CMC-HV / CMC-LV

Description

CMC, a technical grade sodium carboxymethyl – cellulose, is a long chain organic colloid that increases viscosity and reduce filtration properties of water base muds. CMC includes three grades: low, high and extra high viscosity.

Application

CMC is effective as a filtration control agent, protective colloid and viscosifier for low solid, water base muds. CMC is stable at temperatures in excess of 1200C ( 250 0F). CMC is relatively stable to bacterial fermentation. It is effective in fluids containing up to approximately 50,000mg/l sodium chloride. CMC is more effective when concentration of calcium are less than 500 mg/l.

Recommended treatment

CMC – EHV is recommended for use in low solids water base muds when a significant increase in viscosity is needed. A concentration of 0,3 to 2,85kg / m3(0,1 to 1,0 lb/bbl) is normal adequate obtain satisfactory properties. CMC- HV concentration level are 1,4 to 11,4 kg/m3( 0,5 to 4,0 lb/bbl), however, actual concentration will depend on the type mud system, wellbore temperatures, filtrate value, and viscosity required.CMC – LV concentration level are 2,85 to 11,4 kg/ m3( 1,0 to 4,0 lb/bbl), but actual concentration will depend as the same CMC- HV.

Typical physical properties

Appearance…………………White powder

Bulk density…………………752kg/m3(47lb/ft3)

Hygroscopic……………………..Slightly

PH in H2O………………………Neutral

Safe handling recommendations

Utilize normal precaution for employee protection when handling chemical products.

Use of appropriate respirator gloves, goggles and apron is recommended for employee comfort and protection.

Shipping

CMC does not have a restricted classification for transportation by the international or domestic regulatory agencies.

Packing

CMC is packaged in 25 kg multi – wall bags

 
 
 
Privacy Statement  |  Term of Use  |  Site Map  |  Location Map
Visitor: 849122 Copyright © 2009 by Thuan Phong. Thiết kế web bởi Trang Web Vàng.