FLOCCULANT CTP-2 is a cationic flocculant with widespread use as a filter aid in water injection systems and reverse demulsification in oil field production systems.
FLOCCULANT CTP-2 can be used alone or in conjunction with inorganic coagulants.
FLOCCULANT CTP-2 is a sunthetic organic electricaly charged polymer in aqueous solution.
APPLICATION
FLOCCULANT CTP-2 may be injected as supplied or further diluted with water. The recommended treatment rate is 1 – 10 ppm but dosage required will depend on the quality of the water and the physical parameters of the system. Used in water injection systems, FLOCCULANT CTP-2 is normally injected upstream of the fine filters at approximately 1 ppm.
