CAUSTIC SODA is sodium hydroxide, NaOH.
Molecular weigh 40.07, H 2.52% , Na 57.48, O 40.00% .
Application
CAUSTIC SODA is a highly alkaline compound
used to control the PH in water base muds. It will further assist in the
solubility of deflocculant, e.g lignosulfonate and chrome lignite. Addition of
CAUSTIC SODA increases the hydration rate of clays. High PH is an aid to
controlling corososion and combat H2S gas.
Recommended treatment
CAUSTIC SODA should ba added to the mud as
an aqueous solution. Dissolve the CAUSTIC SODA i a chemical barrel and add
slowly over a complete circulation. The amount of CAUSTIC SODA erequired is
dependent o several factors, such as the PH of the mud, type and concentration
of additives in the mud system and type of formations drilled.
Typical physical properties
Appearance White pearls flakers
Specific gravity ................2.13
Solubility (200C) .Soluble
in water in all proportions
PH (3% solution) .14
Safe handling recommendations
Use long sleeve rubber gloves, and apron,
boots and gloves when handing product Eye bath and shower facilities should
be available close to area where product is being used. In case of contact with
eyes wash with large amount of water for a prolonged period of time and seek
medical aid.In case on contact with skin wash plenty of water and remove
contaminated clothing.
Shipping
CAUSTIC SODA is classification for
transportation by the international and domestic regulatory agencies.
